If you want to apply a minor tweak to the document, it must not require much time to Finish form. This type of basic action does not have to require extra training or running through handbooks to understand it. Using the appropriate document modifying instrument, you will not spend more time than is necessary for such a quick change. Use DocHub to streamline your modifying process whether you are a skilled user or if it is the first time making use of an online editor service. This instrument will take minutes or so to figure out how to Finish form. The only thing required to get more productive with editing is actually a DocHub account.
A plain document editor like DocHub will help you optimize the time you need to spend on document modifying no matter your prior knowledge about such instruments. Create an account now and boost your efficiency instantly with DocHub!
The Formlabs Finish Kit makes the final stages of 3D printing quick and easy. When your parts have finished printing, the build platform will return to the top of the machine. Always wear disposable gloves when handling uncured resin. Open the cover and unclamp the build platform. Turn the platform over so that no resin drips. Transfer the build platform to the finishing tray. The parts will be attached to the build platform. Take the scraper and try to get underneath the base of the part. Hold the build platform and tray by placing your other hand below the build platform. Always scrape away from yourself. The scraper is a sharp tool and should be used with care. After removing all of your parts, place them in the rinse tub filled with isopropyl alcohol. We recommend using isopropyl alcohol of 90% concentration or higher. Agitate the part using the rinse basket for a couple of minutes. If the part is very delicate, you may want to skip this step. Let the part soak for 10 minutes. Thi