People frequently need to rework trace in EGT when working with forms. Unfortunately, few applications provide the tools you need to accomplish this task. To do something like this normally requires changing between several software packages, which take time and effort. Fortunately, there is a solution that works for almost any job: DocHub.
DocHub is an appropriately-built PDF editor with a full set of useful functions in one place. Altering, signing, and sharing forms is simple with our online tool, which you can access from any internet-connected device.
By following these five basic steps, you'll have your revised EGT rapidly. The intuitive interface makes the process quick and efficient - stopping switching between windows. Try DocHub today!
welcome to dorman products installation video for exhaust gas temperature sensor bung replacement this installation is considered difficult and should take an hour to an hour and a half after removing the catalyst note this installation time does not include removing and reinstalling the catalyst with the catalyst and original egt sensor off the vehicle mark the area to be cut using the new bung mounting plate as a template using a cut-off wheel cut through the catalyst housing inside the marked lines leaving the corners attached for now with the four main cuts complete use a reciprocating saw to cut through two of the corners then pry the bung outward breaking through the remaining two corners to remove file any burrs from the edges of the cuts then use an abrasive disc to remove any corrosion from the area to be welded make any necessary adjustments to the bung mounting plate to conform to the contour of the catalyst housing using an appropriate welder for stainless steel thoroughly
