Have you ever had trouble with editing your MCW document while on the go? Well, DocHub comes with an excellent solution for that! Access this online editor from any internet-connected device. It allows users to Replace print in MCW files quickly and anytime needed.
DocHub will surprise you with what it offers. It has powerful capabilities to make whatever updates you want to your paperwork. And its interface is so simple-to-use that the whole process from start to finish will take you only a few clicks.
When you complete adjusting and sharing, you can save your updated MCW document on your device or to the cloud as it is or with an Audit Trail that includes all adjustments applied. Also, you can save your paperwork in its initial version or transform it into a multi-use template - complete any document management task from anyplace with DocHub. Subscribe today!
Im 3D Luke and Im about to show you how to replace your cooling fan on your 3D printer [Music] quick note Id recommend following along with the link in the description its from prusas website and its what I base this tutorial off of your control board and disconnect the print fan cable from the board cut the zip ties on the cable holder and remove them remove the textile sleeve from the Cable Bundle unscrew the four screws on the X carriage back part and push the print fan cable through the opening in the X carriage back release the two screws on your old print fan and replace it with the new print fan first Slide the fan into the fan shroud and make sure its aligned properly then tighten your screws carefully carefully guide the print fan cable and push the print fan cable through the opening and the X carriage back place the x-carriage back on the extruder and secure it using the same four screws we loosened at the beginning place the textile sleeve back on make sure your zip