If you frequently work outside your workplace and complete tasks on the go, then DocHub is the document management service you need. It’s a cloud solution that operates on any internet-connected device, and you can work with it from anyplace. The interface is intuitive yet powerful, so you’ll need only a couple of minutes to Replace card in Heads of Agreement Template and make other required adjustments.
Stop wasting time trying to find a perfect document editor; explore DocHub today and prepare your forms wherever you are!
this video on the DTC 1,500 printer will show you how to replace the printhead disconnect the printer power and USB cables tilt the printer onto its back remove the adhesive tape from the printhead cover use a flathead screwdriver to lift the cover pull these two tabs inwards and pull upwards to loosen the printhead unlock the printhead by moving the white push rod to the right the printhead assembly can now be pulled upwards and out hold the printhead mount and rotate the printhead away from you to release it remove the Torx screw to release the grande cable remove the cable connector being careful not to damage the pins [Music] connect the wires to the new printhead make a note of the printhead resistance value reconnect the ground cable and secure it with the torque screw previously removed now clip the printhead back onto the mount insert the printhead mount assembly into the printer verify that the white push rod is on the right side of the tab replace the printhead cover now clic