Time is an important resource that every company treasures and attempts to convert into a advantage. When selecting document management software program, pay attention to a clutterless and user-friendly interface that empowers users. DocHub delivers cutting-edge tools to improve your file administration and transforms your PDF editing into a matter of one click. Replace Advanced Field to the Safety Contract with DocHub to save a ton of time and increase your productivity.
Make PDF editing an simple and intuitive operation that saves you plenty of precious time. Quickly adjust your files and send out them for signing without the need of adopting third-party alternatives. Give attention to pertinent tasks and boost your file administration with DocHub today.
PUT ON ESD-WRISTBAND Make sure to wear an ESD-wristband connected to electrical ground when replacing the safety control board STEP 1: TURN POWER OFF STEP 2: UNPLUG POWER CABLE STEP 3: PUSH POWER BUTTON TO DISCHARGE PSU STEP 4: UNPLUG TEACH PENDANT Remove zip ties and unplug cable for Teach Pendant STEP 5: REMOVE THE FOUR NUTS (10MM) STEP 6: REMOVE CONTROL BOX BRACKET Take out the control box bracket and place it on the edge of the control box STEP 7: UNPLUG ALL POWER CABLES FROM THE CONTROL BOARD STEP 8: UNPLUG COMMUNICATION CABLES FOR ROBOT AND FOR PSU/FAN/ENERGY EATER STEP 9: REMOVE MAIN POWER WIRES Use a screwdriver to remove the main power wires for the power supply (PZ2) THE CONTROL BOX BRACKET CAN NOW BE REMOVED STEP 10: REMOVE SCREWS Use a torx T20 screwdriver to remove the 4 screws that hold the power supply in place STEP 11: REMOVE THE POWER SUPPLY AND PLACE IT IN THE NEW BRACKET STEP 12: INSERT SCREWS Insert the 4 screws and tighten them (Torx T20 1.0Nm) STEP 13: PLACE THE