Unusual file formats in your everyday papers management and editing processes can create instant confusion over how to modify them. You might need more than pre-installed computer software for effective and fast document editing. If you need to bind side in LOG or make any other simple alternation in your document, choose a document editor that has the features for you to work with ease. To handle all the formats, such as LOG, choosing an editor that works properly with all types of documents will be your best option.
Try DocHub for effective document management, regardless of your document’s format. It has potent online editing instruments that simplify your papers management operations. You can easily create, edit, annotate, and share any file, as all you need to gain access these characteristics is an internet connection and an functioning DocHub profile. Just one document solution is everything required. Don’t lose time jumping between different programs for different documents.
Enjoy the efficiency of working with a tool created specifically to simplify papers processing. See how effortless it is to modify any document, even if it is the first time you have dealt with its format. Register an account now and improve your whole working process.
with bottom binds the compression is on the bottom of the log or limb because the weight of the log is not supported on both ends gravity will cause tension on the top pulling the wood fibers apart and compression on the bottom pushing the wood fibers together if you cut from the bottom too far up the kerf will close pinching the saw if you cut from the top of a heavy log or one under a lot of tension the log can explode potentially causing the saw to fly back or throw chain to allow a smoother safer release cut your offside first to limit how close you have to be to the log then make a partial cut on the compression side the bottom in this case finish with the tension side cutting from the top and prepare to step back [Music] [Music] [Music] on smaller trees a slight rocking of the saw on both the top and bottom cuts can be used to cut the off side rather than three distinct cuts still make an effort to cut the off side to allow the tip to be exposed only as much as it needs to be on