DocHub is an all-in-one PDF editor that lets you bind badge in HWPML, and much more. You can highlight, blackout, or remove paperwork components, add text and images where you want them, and collect data and signatures. And since it runs on any web browser, you won’t need to update your software to access its robust features, saving you money. When you have DocHub, a web browser is all you need to process your HWPML.
Sign in to our service and adhere to these guidelines:
It couldn't be easier! Enhance your document management now with DocHub!
to make a badge start by placing the metal front into the first die the metal edge should slot easily into the groove in the die next place your artwork on top face up then place one piece of plastic film on top of your artwork itamp;#39;s important to only use one piece to prevent the machine from jamming move the gray ring onto the first die and turn the center punch so it looks like a top hat rotate the dies so the first die is directly under the handle and pull firmly down if you are using a 45 or 58 millimeter machine make sure there is a spacer in the second die then place the badge back into the die with the zigzag side of the pin facing up move the gray ring and top hat onto the second die then turn the top hat upside down so it fits into the gray ring rotate the dies again so the second die is directly under the handle and pull firmly down as you can see the top hat should be pushed all the way down onto the die to insure the badge makes correctly lift off the gray ring and t
