Many people find the process to wipe label in Amigaguide rather challenging, especially if they don't often work with paperwork. However, nowadays, you no longer have to suffer through long guides or wait hours for the editing software to install. DocHub lets you change documents on their web browser without installing new programs. What's more, our powerful service offers a complete set of tools for professional document management, unlike so many other online solutions. That’s right. You no longer have to export and import your templates so frequently - you can do it all in one go!
No matter what type of document you need to alter, the process is straightforward. Take advantage of our professional online service with DocHub!
when the end of a roll is docHubed the first step is to lock down the material on both sides at the splicing table set the web guide to offline pressing the two arrows button turn the handles clockwise with a sharp blade cut the stock using one of the slots in the splicing table if laminate was being applied turn off the laminate tension sensor and cut the laminate at the printer use the cutter to cut the stock if a print job has been paused the job will first need to be canceled before cutting it is important to hold the dancer arm rollers in place once those are held a cut can be made at the printer slowly lower the dancer arms move the pinch roller to the open position unlock the stock on the printer side at the splicing table remove the stock the label roll onto the mandrel push it in until it stops and tighten the mandrel make sure the roll will unwind clockwise feed the material under the two bottom bars and to the outside of the two side bars if necessary cut the end of the stock
